Synology DX513 User Manual page 12

3 Load drives in the drive trays:
• For 3.5" drives: Remove the fastening panels from the sides of the drive
tray. Place the drive in the drive tray. Then insert the fastening panels to
secure the drive in place.
• For 2.5" drives: Remove the fastening panels from the sides of the drive
tray and store them in a safe place. Place the drive in the blue area (shown
below) of the drive tray. Turn the tray upside down and tighten the screws
to secure the drive in place.
4 Insert the loaded drive tray into the empty drive bay.
Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be
able to function properly.
12