Table of Contents
Advertisement
Audio Out format
With Audio Out format you can set the audio out signal of the
TV to fit the sound processing capabilities of your Home
Theater System.
For more information, press
Out format.
Audio Out leveling
With Audio Out Leveling you can level the sound volume of
the Home Theater System with the volume of the TV when you
switch from one to the other.
For more information, press
Out Leveling.
Audio Out delay
If you set an Audio sync delay on your Home Theater System,
to synchronize the sound with the picture, you must turn off
Audio Out delay on the TV.
For more information, press
Out Delay.
Audio Out offset
If you cannot set a delay on the Home Theater System, you can
set a delay on the TV with Audio Out offset.
For more information, press
Out Offset.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted.If you have changed the placement
of the TV since then, adjust this setting accordingly for best
sound reproduction.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK.
3 - Select On a TV stand or Wall mounted and press OK.
4 - Press , repeatedly if necessary, to close the menu.
17.4
Universal Access - Key beep
Key beep gives an audio feedback each time you press a key on
the remote control. The volume of the beep is fixed.
To turn on Key beep . . .
Keywords and look up Audio
Keywords and look up Audio
Keywords and look up Audio
Keywords and look up Audio
1 - While you watch TV, press OPTIONS.
2 - Select Universal Access - Key beep > On, then press OK.
For more information, press
up Universal Access - Key beep.
53
Keywords and look
Advertisement
Table of Contents
