Universal Access - Philips 6561 Series User Manual

5 - Press  (up) or  (down) to adjust the value.
6 - Press  (left) to go back one step.
Time Zone
For some countries, you can select specific time
zones to set the TV clock correctly.
To set the time zone (if available)...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press  (right) to enter the menu.
3 - Select Clock > Time Zone.
4 - According to your country, you can select a time
zone or set a time offset to correct the TV clock.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Sleep Timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer...
1 - Press , select All Settings and press OK.
2 - Select Region and Language and
press  (right) to enter the menu.
3 - Select Clock > Sleep Timer.
4 - With the slider bar you can set the time to up to
180 minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
5 - Press  (left) repeatedly if necessary, to close
the menu.
12.8

Universal Access

Switch On
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on in Universal
Access menu.
To switch on Accessibility...
1 - Press , select All Settings and press OK.
2 - Select Universal Access and press  (right) to
enter the menu.
3 - Select Universal Access one step further.
4 - Select On.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Hard of Hearing
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal Access.
To switch on Hearing impaired...
1 - Press , select All Settings and press OK.
2 - Select Universal Access and press  (right) to
enter the menu.
3 - Select Hearing impaired and press  (right) to
enter the menu.
4 - Select On.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Audio Description
Switch On
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
Description first.
Also, before you can switch on Audio Description,
you have to switch on Universal Access in setup
menu.
With Audio Description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available)...
To switch on Audio Description...
1 - Press , select All Settings and press OK.
2 - Select Universal Access and press  (right) to
enter the menu.
3 - Select Audio Description and press  (right) to
enter the menu.
4 - Select Audio Description one step further.
5 - Select On.
6 - Press  (left) repeatedly if necessary, to close
the menu.
Mixed Volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume...
64