Drip Stop / Stop And Serve; Grinding And Brewing Later ("Auto"); Brewing Coffee Without The Grinder - Capresso CoffeeTEAM PRO Plus 487.05 Operating Instructions Manual

12-cup digital coffee maker / conical burr grinder combination with glass carafe
Table of Contents

Advertisement

a slight pause before grinding to allow the doors of the bean container and
coffee chute to open.
• The bean container door will open, then the grinder will start grinding and the
ground coffee will push into the GoldTone filter.
NOTE: Once grinding is finished, there will be a slight pause as the door of
the bean container closes. The grinder will perform an automatic cleaning
cycle and will grind again for a few seconds to clear out any coffee beans
remaining in the grinder. The ground coffee chute will shut and the brewing
process starts.
CAUTION: As long as the grinder is in operation, DO NOT open the bean
container lid, DO NOT open the filter basket and DO NOT insert your finger or
any other object into the grinder.
• After brewing is finished remove the carafe from the platform. Slowly pour
coffee. Return the carafe to the heating platform.
• The CoffeeTEAM PRO Plus will keep the coffee hot for two hours after
brewing. Then the cup icon light will turn off, indicating that the heating
element is turned off.
IMPORTANT: If you hear a loud buzzing noise during grinder operation or if the
grinder gets blocked or jammed, push the brew button to stop grinding and
unplug the machine and follow cleaning instructions in chapters 10.5 to 10.7.

8.1 DRIP STOP / STOP AND SERVE

• While the coffee is brewing you can remove the carafe to pour a cup or two.
The drip stop will close automatically.
• To avoid any overflow, replace the carafe within 20 seconds.
CAUTION: The drip stop might not close completely allowing coffee to drip
onto the platform. In this case immediately place carafe back into the machine
and let all the coffee flow into the carafe.
• After brewing is finished, check the GoldTone filter for any clogging and rinse
the filter insert to remove any coffee particles from the drip stop (Fig. 5).

8.2 GRINDING AND BREWING LATER ("AUTO")

• Coffee maker is plugged in and the time and auto-on time are set.
• Beans are in the bean container and bean container lid is on and pushed
down securely.
• Fill the water tank with the desired amount of water.
• Make sure the filter insert and GoldTone filter are in place and the GoldTone
filter is empty.
• Make sure the filter holder is closed.
• Insert the carafe with lid, into the machine.
• Push the AUTO button briefly. The clock icon will illuminate on the display.
At the preprogrammed time, the clock icon will disappear, the cup icon will
illuminate and the grinding and brewing will start.
Recommendation: If you want your coffee ready by 7:30, set the auto-on
time to 7:15.
NOTE: See chapter 7.1, b for Setting the Auto-On Time.

9. BREWING COFFEE WITHOUT THE GRINDER

You can use your CoffeeTEAM PRO Plus like a regular drip coffee maker with
pre-ground coffee (without using the grinder).
13

Advertisement

Table of Contents
loading

Table of Contents