Drip Stop / Stop And Serve; Grinding And Brewing Later "Auto; Brewing Coffee Without The Grinder; Brewing Pre-Ground Coffee Later "Auto - Capresso CoffeeTEAM GS 464 Operating Instructions Manual

CoffeeTEAM GS (glass carafe):
• After brewing is finished remove the carafe from the platform.
Slowly pour coffee. Return the carafe to the heating platform.
• The CoffeeTEAM GS will keep the coffee hot for two hours
after brewing. Then the ON/OFF light will turn off, indicating
that the heating element is turned off.
• To keep coffee hot longer:
First push the BREW button, then push the ON/OFF button.
This prevents the machine from grinding again.

10.1 DRIP STOP / STOP AND SERVE

• While the coffee is brewing you can remove the carafe to pour
a cup or two. The drip stop will close automatically.
• To avoid any overflow, replace the carafe within 20 seconds.
CAUTION: The drip stop might not close completely allowing
coffee to drip onto the platform. In this case immediately place
carafe back into the machine and let all the coffee flow into the
carafe.
• After brewing is finished, check the GoldTone filter for any
clogging and rinse the filter insert to remove any coffee
particles from the drip stop (Fig. 5).
10.2 GRINDING AND BREWING LATER ("AUTO")
• Coffee maker is plugged in and the time and auto-on time are set.
• Beans are in the bean container.
• Fill the water tank with the desired amount of water.
• Make sure the Filter Insert and GoldTone filter are in place and
the GoldTone filter is empty.
• Make sure the Filter holder is closed.
• Insert the carafe with lid, into the machine.
• Make sure the "GRIND/BREW" light is illuminated.
• Push the PROG button briefly. The green light turns on and the
display shows "AUTO". At the preprogrammed time, the green
light will turn off, the red ON/OFF light will illuminate and the
grinding and brewing will start.
Recommendation: If you want your coffee ready by 7:30, set
the auto-on time to 7:15.

11. BREWING COFFEE WITHOUT THE GRINDER

You can use your CoffeeTEAM like a regular drip coffee maker
with pre-ground coffee (without using the grinder).
• Open the water container lid (Fig.1.7) and fill the desired
amount of cold water into the water container.
• Push the Filter Release button to open and fill ground coffee
into the GoldTone filter. Close the Filter Holder.
• Insert the carafe with lid into the machine.
• Push the "BREW" button. The red "BREW" light illuminates.
• Push the ON/OFF button. The red ON/OFF light illuminates and
the brewing process starts immediately.
11.1 BREWING PREGROUND COFFEE LATER ("AUTO")
• Coffee maker is plugged in and the time, auto-on time are set.
• Fill the water tank with the desired amount of water.
• Push the Filter Release button to open and fill ground coffee
into the GoldTone filter. Close the Filter Holder.
• Insert the carafe with lid into the machine.
• Push the "BREW" button. The red "BREW" light illuminates.
• Push the PROG button briefly. The green light turns on and
the display shows "AUTO". At the preprogrammed time, the
green light will turn off, the red ON/OFF light will illuminate and
the brewing will start.
11.