Monte Carlo Fan Company 5DCR52 Series Owner's Manual page 4

19
Attach blade assembly to motor
using the motor screws and washers
provided. Tighten screws securely.
22
Remove the 3 screws on the switch
housing plate and save.
20
Loosen 2 screws and remove 1 screw
and save.
23
Install the switch housing using the
three screws previously removed.
21
Install the switch housing plate by
aligning the 2 screws with the 2 key
slot holes on the plate and twist to
lock into place. Install the 1 screw
removed and tighten the other 2
screws securely.