Cisco UCS C24 M3 Manual page 22

CONFIGURING the SERVER
Choose Optional SFP Modules
Optical Cisco SFP+ modules are listed in
Table 9 Available SFP Modules
Product ID (PID) PID Description
SFP-10G-SR 10GBASE-SR SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
DS-SFP-FC8G-SW 8 Gbit SFP+ Module
850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
Approved Configurations
(1) Choose Up to Two SFP+ Modules for Each Network Card Ordered
You may choose one or two SFP+ optical modules cables for each network card ordered. You
■
would normally order two modules for connecting to the primary and redundant network
switching equipment. With the SFP+ optical modules, you can use common fiber optic
cables, widely available.
See Figure 5 on page 23
Caveats
The SFP-10G-SR optical module listed in
cards, as they do not come by default with any optical modules:
—
—
—
—
The DS-SFP-FC8G-SW optical module listed in
PCIe cards, as they do not come by default with any optical modules:
—
22
for typical SFP+ and twinax connections to the network cards.
UCSC-PCIE-CSC-02 (Cisco VIC 1225 Dual Port 10Gb SFP+ CNA)
UCSC-PCIE-BSFP (Broadcom 57712)
N2XX-ABPCI02 (Broadcom 57711)
N2XX-AEPCI01 (Emulex OCe10102-F)
N2XX-AEPCI05 (Emulex LPe 12002, 8Gb dual-port Fibre Channel HBA)
Table 9.
Table 9 should be ordered only for the following PCIe
Table 9 should be ordered only for the following
Cisco UCS C24 M3 High-Density SFF Rack-Mount Server