Connection Via Ethernet Cradle - Casio IT-9000WM Series Quick Start Manual

5.5 Connection via Ethernet Cradle

This chapter describes how to establish a high speed LAN connection on the WLAN non-integrated
models with HA-L62IO Ethernet cradle.
Follow the steps below:
1. Connect the dedicated AC adapter to the Ethernet cradle as described in Chapter 4.2.
2. Connect one end of the network cable to the Ethernet cradle and the other end to the network hub.
3. Make sure the selector switch on the back of the HA-L62IO Ethernet cradle is set to the position
"LAN".
4. Place IT-9000 in the cradle and navigate to Start → Settings → Connections tab →
Network Cards.
5. The following screen appears. Double tap "AX88772".
Figure 5.25
6. The following TCP/IP screen appears. Set up all the parameters in IP Address and Name
Servers tabs as required and tap ok button.
Figure 5.46
7. If the connection is established correctly, the icon ( ) in the Taskbar changes to (
40
).