Advertisement
If you need to remove or assemble the stand, please read the following:
Before attaching/detaching the stand, be sure to turn the TV off.
•
Before performing any work, spread cushioning out over the base area to
•
lay the TV on. This will prevent it from being damaged.
Assembly Instructions (normal stand)
Fix the bracket at the stand with four screws. (Fig. 1)
Put the television on the table, fix the stand and the unit with the screws
supplied in the carton. (Fig. 2)
To detach the stand from the TV, please reverse these steps.
Your LED TV is able to accommodate wall mounting with the use of a wall
mount bracket (not supplied with the LED TV) and the mounting holes on the
back of the unit. We recommend removing the TV stand prior to wall mounting
the TV.
1. Please ensure the distance of the wall mounting holes is 200mm or
400mm on the back cabinet before you mount your TV on the wall.
2. Mark the horizontal distance between the screw holes A and B with a
pencil on the wall by using the long wall-mounting bracket as a ruler.
(There is "0" engraved in the middle of the long wall-mounting bracket,
1.
LED TV
2.
Long wall-mounting bracket
3.
Mounting screw
4.
Self-tapping screw
5.
Short wall-mounting bracket
6.
Nylon sleeve
7.
Wall
7
Advertisement
