Advertisement
▲ ▼
Press / key to select "Auto Search" option. Then
press OK key to start a notice window. In this notice
window, you can select country in the "Country
Selection" option and set "Tune Type" option.
The number of searched channels will be shown on the
screen. If you set "Tune Type" to "DTV+ATV", once
searching for DTV channels is over, the TV will start to
search for analog channels. (Please note, Australia no longer
has analog TV signals). When the whole searching is finished,
all the channels will be stored in memory, and a message will
appear on the screen as per the diagram on the right:
NOTE:If you want to exit the search, you can press the EXIT
button.
▲ ▼
Press / key to select "EPG" option.
Press "OK" key to enter EPG submenu.
This function is to search manually for analog television signals. It will not
function in Australia.
In the ATV/DTV source, you can choose "DTV Manual
Search" to enter "DTV Manual Search" menu. You can use
◀ ▶
/ button to choose the channel and press OK button to
search, and then the TV will store the DTV channel if there
is a DTV signal present.
18
Advertisement
