Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hotpoint HBE9X
Summary of Contents for Hotpoint HBE9X
- Page 1 Instructions for use English, 7 HBE9X HBE6X...
-
Page 7: General Safety
English The hood can look different to that illustrated in the drawings in this ELECTRICAL CONNECTION booklet. The instructions for use, maintenance and installation, however, The mains power supply must correspond to the rating indicated on the plate remain the same. situated inside the hood. - Page 8 LEDs L1 and L2 remain on for about 2" before the hood goes back to OFF. CONTROLS Deactivating charcoal filter signal: To select the functions of the hood just touch the commands. Set the hood to OFF and press T5 button for 5”. Once the button has been pressed, the LEDs related to the filter signals currently active light up.
-
Page 9: Maintenance
MAINTENANCE ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. -
Page 10: Technical Data
If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost 5 sec. by pulling out the plug. Then plug it in again and try once more before contacting the Technical Assistance Service. TECHNICAL DATA Model HBE9X Height 74-119,6 cm Width 89,8 cm Depth 52,3 cm...
Need help?
Do you have a question about the HBE9X and is the answer not in the manual?
Questions and answers