• Before cleaning or servicing the unit, disconnect it from the mains by pulling the power plug or disconnecting the Warnings main circuit breaker. ! Keep this manual for reference. If you • Always wear work gloves when installing sell, transfer or move the unit to another and servicing the unit.
Page 8
• Strictly observe all local regulations in relation to the technical and safety measures to be employed in fumes extraction. • Clean the product frequently, inside and out (AT LEAST ONCE A MONTH, and in observance of the maintenance instruction given in this manual). • Failure to observe the hood cleaning and filter cleaning/replacement instructions can result in fires.
! Avoid suddenly changing the diameter of the duct. Model code Bulb (V) Bulb draw (W) Total draw (W) ! The duct must have as smooth an inner surface as HHP7.5CM possible. Halogen 2 x 25 ! The duct must be made of regulatory material.
Grease/odour filter warnings PYRAMID controls The T2 icon flashes to indicate that the grease filter is saturated, while T3 flashes to indicate that the odour filter Models with mechanical keypad is saturated, and if both are flashing then both filters are HHP7.5CM saturated. You must then clean/replace the grease filter (A) HHP6.5CM or odour filter (B) or both, accordingly (see “Maintenance HHP9.5CM and care”). HHC6.7AM(WH) HHC6.7AM(BK) To reset the filter counter: Hold down T4 for three seconds while the hood is on.
Grease/odour filter warnings Periodic cleaning The bar at the top left flashes to indicate The hood must be cleaned frequently (at least as often as that the grease filter is saturated. you service the grease filter), inside and out. Use a damp cloth and a neutral liquid detergent with lukewarm water. Do not use abrasive or corrosive products. Warning: Failure to observe the hood cleaning and filter The bar at the top right flashes to indicate cleaning/replacement instructions can result in fires. Follow that the odour filter is saturated. the instructions carefully. The manufacturer is not liable for any damage to the motor or fires caused by incorrect care or failure to follow the above instructions.
Replacing the lights LED The hood is fitted with a lighting system based on LED technology. The LEDs ensure optimal lighting, longer life and lower consumption compared with traditional lights. To replace them please contact the assistance service. Electrical cable If the power cable is damaged, it can be replaced by the manufacturer or his technical service, to prevent any attendant risks.
Page 13
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
Page 16
195107497.04 03/2013 - XEROX FABRIANO PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
Need help?
Do you have a question about the HHP7.5CM and is the answer not in the manual?
Questions and answers