Beamz LED ACIS II 8 WAY 10W RGBW DMX Instruction Manual page 6

The LED Acis can be operated by DMX control or can be used as an individual unit without controller.
It can be linked together as many as required in master/slave mode, and perform a great built-in programmed
lighting show or it can be triggered by music.
Control
Three ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
DMX Settings
CH1 0~255
CH2 0~255
CH3 0~255
CH4 0~255
CH5 11~255
11~127
CH6
139~255
11~200
CH7
201~255
CH8 0~255
Red
Green
Blue
White
Strobe（From slow to fast）
Clockwise Rotation（From slow to fast）
Anticlockwise Rotation（From slow to fast）
Auto DMX
Sound DMX
Auto DMX/ Sound DMX Speed (Slow--Fast)