Gigabyte GA-X99-SOC Force User Manual page 11

Storage Interface - 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
(An operating system installed on the SATA3 0~5 connectors cannot be used on
the sSATA3 0~3 connectors.)
USB Chipset:
Š
- 2 x USB 3.0/2.0 ports available through the internal USB header
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Chipset + 2 Renesas
Š
- 8 x USB 3.0/2.0 ports on the back panel
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Š
Connectors
1 x OC PEG Power Connector
Š
1 x SATA Express connector
Š
1 x M.2 Socket 3 connector
Š
10 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
1 x water cooling fan header (CPU_OPT)
Š
3 x system fan headers
Š
1 x heatsink LED power connector
Š
1 x Thunderbolt add-in card connector
Š
1 x OC Panel connector (for future expansion)
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x power button
Š
1 x reset button
Š
1 x Clear CMOS button
Š
1 x Gear button
Š
1 x OC Tag button
Š
1 x OC Trigger switch
Š
1 x CPU BCLK Down button
Š
1 x CPU BCLK Up button
Š
1 x CPU Ratio Down button
Š
1 x CPU Ratio Up button
Š
1 x Settings Lock button
Š
1 x Direct to BIOS button
Š
1 x OC PCIe switch
Š
1 x OC Ignition button
Š
1 x Clear Battery button
Š
1 x DualBIOS switch
Š
1 x onboard voltage measurement module
Š
Temp sensor ports
Š
Back Panel 4 x USB 2.0/1.1 ports
Š
Connectors 1 x PS/2 keyboard/mouse port
Š
1 x CPU overclocking button
Š
1 x BIOS switch button
Š
1 x Clear CMOS button
Š
uPD720210 USB 3.0 Hubs:
®
- 11 - Hardware Installation