Manual Transmission - Oce cm3521 User Manual

Transmission
3.8

Manual Transmission

Manual Transmission
This operation is performed when sending documents and confirming the
status of the receiving machine.
Manual Transmission allows you to combine the keypad, [Program] and
[Address Book] to transmit the data to multiple destinations.
Memory transmission cannot be used with manual transmission.
1
Press [Fax] on the control panel to display the FAX screen.
2
Place the original.
– For details, see "Placing the Original on the Machine" on page 3-6.
3
Press [Off-Hook].
– If [RX] has been selected, press [TX] to switch to the transmission
mode.
4
Set the functions of Scan Setting as necessary.
– See "Setting Transmission Conditions" on page 3-11 for setting
functions on the FAX screen.
– See "Application Functions Overview" on page 7-4 for setting
functions on the FAX Application screen.
5
Select the destination with the keypad, [Program] or [Address Book].
– You can input up to 60 digits.
– Pressing [On-Hook] returns the display to the FAX screen.
– When an external telephone is connected, documents can be sent
by lifting up the receiver of the external telephone.
6
When the signal sounds, press [Start] of the Off-Hook screen.
– Pressing [Start] on the control panel allows the Off Hook Start Fax
communication screen confirmation to appear. Transmission starts
when you press [Yes].
– When the external telephone is connected, hang up the receiver of
the external telephone after pressing [Start].
Transmission begins.
cm3521
3
3-37