AEG LAVAMAT 61271 WDBI User Manual page 37

Fig. 5
Fig. 6
E
Fig. 7
15. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
A
B
A
B
C
A
C
B
. Put the packaging in
• Mounting the door
Fix the hinges to the appliance by
means of the M5x15 screws . The hing-
es can be adjusted to compensate for
possible uneven thickness of the door.
To align the door perfectly it is neces-
sary to loosen the screw , adjust the
door and tighten the screw A again
(Fig. 5).
• Counter-magnet
The appliance is prearranged for a
magnetic closure of the door. To ena-
ble a correct operation of this device,
it is necessary to screw the counter-
magnet A (steel disk + rubber ring) in-
to the inner side of the door.
Its position must correspond to the
magnet B on the appliance (Fig. 6).
If the door has to be opened from left to
right, invert the position of the plates E ,
the magnet D and the plate C. Mount
D
the counter-magnet D and the hinges A
as previously described (Fig. 7 )
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
Do not remove the screw B (Fig.
5.
Do not remove the screw C.
CAUTION!
Do not remove the screw B.
37