AEG LAVAMAT 61271 WDBI User Manual page 36

36 www.aeg.com
Preparation and assembly of the door
Fig. 2
16-22 mm
Fig. 3
Fig. 4
Ø 35 mm
14 mm
595-598 mm
1
• The machine is originally pre-arranged
for the assembly of a door opening
from right to left (Fig. 2).
• Door
The dimensions of the door should be:
– width 595-598 mm
X
– thickness 16-22 mm
416
– the height X depends on the height
mm
of the adjacent furniture's base (Fig.
3).
22±1,5 mm
• Hinges
To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth
12.5-14 mm depending on the depth
of door furniture) on the inner side of
the door. The distance between the
holes hobs fixing centres must be 416
mm.
2
The distance from upper edge of the
door to the centre of the hole de-
pends on the adjacent furniture's di-
mensions.
The hinges will be fixed to the door by
means of screws for wood 1 and 2
(Fig. 4) supplied with the appliance.