Screen Lock; Program Operation Instructions; Todo - LENCO Kiztab-540 Mini User Manual

1: View All Application Programs
Back to the Desktop from the Program Interface\8. Multitask Selection Key\ 9. Search \ 10. Bluetooth \ 11.
Battery power status, only when this device the battery percentage, it will be revealed \ 12.
Connection Signal;

Screen Lock

The device will enter stand-by status if there is no operation for quite a while or the User has quickly pressed
the Power Key. There are two stand-by statuses: Deep Sleep and Light Sleep --- under the Deep Sleep mode,
the Touch Screen is locked and dark, and it will wake up and enter the Light Sleep mode after the User has
pressed the Power Key. Then, the stand-by screen will reveal A Touch Key and B Touch Key; when the A
Touch Key has been pressed, it will show
Diagram 1 to unlock the Display Screen;
Screen.

Program Operation Instructions

1. ToDo

1. Click
DONE.
\2:Camera \3. Browser\4. Setting\5. Music\6. Back to Current Operation\7.
A
A
, and the User can try to pull it to the
represents the Route when the User's fingers slip around the
and enter the Editing Interface which will then respectively reveal TODO and
B
8
Time \13: Wifi
B Icon as shown in