Identifying Front And Rear Panel; Front View - Sceptre E24 User Manual

Identifying Front and Rear Panel

Front View

POWER INDICATOR - If light is blue, the monitor is turned on. If the light is blinking blue, the monitor
is turned on but not receiving a signal from the computer.
NATIVE RESOLUTION - This monitor's clearest picture is produced under its native resolution. The
native resolution of the monitor is 1920x1080 at 60 Hz refresh rate.
MENU – Menu button brings up the on screen menu. When the on screen menu is being displayed
the menu button functions as ENTER.
DOWN – The down button navigates the selection on the on screen menu downwards. When an
option is being adjusted, the down button decreases the adjustment. This button is also the hotkey for
volume down.
UP – The up button navigates the selection on the on screen menu upwards. When an option is
being adjusted, the up button increases the adjustment. This button is also the hotkey for volume up.
EXIT – The exit button exits either the on screen menu or your current selected option.
SCALE – The scale button switches between 16:9 or 4:3 screen mode.
SOURCE – The source button selects between the 3 sources on the monitor (HDMI, DVI and VGA).
- The power button turns the monitor on or off.
Page12 SCEPTRE E24