Page 2
TOOLS REQUIRED Phillips Screwdriver Adjustable Wrench Channel Locks Plumbers' Putty or Caulking Regular Screwdriver ROUGHING-IN DIMENSIONS 8" 1-9/16" MIN. 2-7/16" 4" 1" 7/8" MAX. FINISHED WALL FINISHED LEVER HANDLE CROSS HANDLE WALL 2-9/16" D. 2-3/16" D. 7-7/8" 1/2" NPT UNION INLETS INSTALL WALL BRACKET WOOD SCREWS CROSS BRACE...
Page 3
INSTALL WALL SPOUT Remove PLASTER GUARDS and unthread ROUGH-IN NIPPLE (1). Inspect that SPOUT NIPPLE O-RINGS (2 & 3) are seated in the grooves of SPOUT NIPPLE (4). See Figure A. Thread SPOUT NIPPLE (4) into VALVE BODY (5). Tighten SPOUT NIPPLE (4) to VALVE BODY (5). Thread ESCUTCHEON MOUNT (6) onto SPOUT NIPPLE (4) until it engages the O-RING (2).
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased JADO BATHROOM AND HARDWARE MFG.