Installing The Cpu - Nexcom NDiS 541 User Manual

Chapter 3: System Setup

Installing the CPU

1. Loosen the screws that secure the heat sink to the chassis.
Heat sink
Remove
screw
• Make sure all power cables are unplugged before you install the
CPU.
CAUTION! CAUTION!
• The CPU socket must not come in contact with anything other
than the CPU. Avoid unnecessary exposure.
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
2. Now remove the heat sink to access the CPU socket.
Bottom Side of the Heat Sink
26
NDiS 541 User Manual