Registering A Unit - Panasonic KX-PRW130 Operating Instructions Manual

Programming
memo can also be displayed for the schedule
alarm.
Important:
R Make sure the unit's date and time setting
is correct (page 12).
Adding a new entry
1
MMenuN (right soft key) a
MSelectN
2
MbN: Select the desired date. a MSelectN
3
MMenuN a MbN: "Add new entry" a
MSelectN
4
Edit the date if necessary. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (30 characters max.;
page 17). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times
R You can select "Off" if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MOFFN
Note:
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1
MMenuN (right soft key) a
MSelectN
2
To see the entries on the selected date,
press MSelectN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: "Detail" a
MSelectN
32
a
a
For assistance, please visit http://www.panasonic.com/help
Editing an entry
1
MMenuN (right soft key) a
MSelectN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Edit" a MSelectN
4
Edit the date if necessary. a MOKN
5
Edit the time if necessary. a MOKN
6
Edit the text memo if necessary (30
characters max.). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times a MOFFN
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
MMenuN (right soft key) a
MSelectN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Erase" a MSelectN
4
MbN: "Yes" a MSelectN a MOFFN
Erasing all entries
1
MMenuN (right soft key) a
MSelectN
2
MListN a MMenuN
3
MbN: "Erase all" a MSelectN
4
MbN: "Yes" a MSelectN
5
MbN: "Yes" a MSelectN a MOFFN

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
a
a
a