Baby Monitor - Panasonic KX-PRW130 Operating Instructions Manual

When a call is received, the unit rings for a
*1
short time while the caller is being identified.
If the phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call. (Caller ID
subscribers only)
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 29).
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 34) with
disconnected.
Storing unwanted callers
You can store up to 100 phone numbers in the
call block list.
Important:
R You must store the phone number with an
area code in the call block list.
n From the caller list:
1
MCN CID
2
MbN: Select the entry to be blocked. a
MDetailN
R To edit the number: MMenuN a
MbN: "Edit" a MSelectN
Press MEditN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSaveN. Go to step 5.
3
MMenuN
4
MbN: "Save CID" a MSelectN
5
MbN: "Call block" a MSelectN
6
MbN: "Yes" a MSelectN
7
Edit the phone number if necessary
(24 digits max.).
8
MSaveN a MOFFN
n By entering phone numbers:
1
MMenuN (right soft key) #217
2
MMenuN a MbN: "Add" a MSelectN
For assistance, please visit http://www.panasonic.com/help
after the call is
3
Enter the phone number (24 digits
max.).
4
MSaveN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing "Out
of area".
1
MMenuN (right soft key) #240
2
MbN: Select the desired setting. a MSaveN
3
MOFFN
Setting the first ring for the call block
list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to "Off". The default setting is "On".
1
MMenuN (right soft key) #173
2
MbN: Select the desired setting. a MSaveN
3
MOFFN
Viewing/editing/erasing call block
numbers
1
MMenuN (right soft key) #217
2
MbN: Select the desired entry.
R To exit, press MOFFN.
3
To edit a number:
MEditN a Edit the phone number. a
MSaveN a MOFFN
To erase a number:
MEraseN a MbN: "Yes" a MSelectN a
MOFFN

Baby monitor

This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby's room, for example) will
automatically call the monitoring handset or
Programming
29