TRENDnet TEW-824DRU User Manual page 48

TRENDnet User's Guide
Gaming
Advanced > Firewall > Gaming
Gaming allows you to define multiple ports (used or required by a specific application or
game) and forward them to a single IP address (a computer or device) on your network.
Using this feature is more secure compared to using DMZ (see "DMZ" on page 42) in
which DMZ forwards all ports instead of only specific ports used by an application. Since
most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service (see
"Identify your network over the Internet" section on page 37).
1. Log into your router management page (see
on page 9).
2. Click on Advanced and click on Security, then click on Gaming.
3. Review the virtual server settings. Click Apply to save settings.
 Rule Enable – Check the option to enable the gaming rule.
 Rule Name – Enter a name for the gaming rule.
 IP Address: Enter the IP address of the device to forward the ports (e.g.
192.168.10.101).
 TCP Ports to Open: Enter the TCP port you would like to set.
 UDP Ports to Open: Enter the UDP port you would like to set.
Note: Please refer to the device documentation to determine which ports and
protocols are required. You should assign a static IP address to the device or
use DHCP reservation to ensure the IP address of the device does not change.
 Inbound Filter: Select the defined IP address range to allow access. (see
Filter" section on page 41).
 Schedule (Optional) – The schedule function allows you to define a schedule
when the gaming rule should be turned on. To define a new schedule, click New
Schedule and refer to page 39 "
schedule, click the drop-down list and the new schedule will be available for
selection. Note: Before applying scheduling, please ensure your Time settings are
configured correct and you have defined a schedule. See page 38 to configure
Time Settings and see page 39 "
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your router management
Create Schedules". After you have created a new
Create Schedules" to create a schedule.
page"
Note: In the Rule List, you can edit a rule by clicking
the rule you would like to edit. You can also delete a rule by clicking
Delete column next to the rule you would like to delete.
"Inbound
TEW-824DRU
under the Edit column next to
under the
45