Timer Setup Using Epg; Cancelling The Timer Setup - Sharp LC-80LE960X Operation Manual

Watching TV

Timer setup using EPG

The TV can be switched to a programme or start
recording for USB-recording at the set time.
1
Press GUIDE.
2
Press a/b/c/d to select the programme you
want to set, and then press ?.
3
Press c/d to select "Watch" or "Record", and
then press ?.
• If you select "No", the TV returns to the EPG screen.
Watch
4
Press c/d to select "Yes", and then press ?.
• The selected TV programme is marked with an icon.
5
Press ? to select "Back".
NOTE
• You cannot select "Record" when the registered USB HDD is
not connected to the USB port.
• A combined total of 16 timer settings ("Watch" and "Record")
can be set.
*Important information:
A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN
code in advance (Page 15).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.

Cancelling the timer setup

1
Press GUIDE.
2
Press a/b/c/d to select the programme with
timer setup, and then press ?.
3
Press c/d to select "Cancel", and then press ?.
4
Press c/d to select "Yes", and then press ?.
E
Cancelling using B button on the remote
control unit
1
Press GUIDE.
2
Press B to display the timer setup list.
3
Press a/b to select the programme you want to
cancel timer setup, and then press ?.
4
Press c/d to select "Cancel", and then press ?.
5
Press c/d to select "Yes", and then press ?.
28
Record No