Installing A Hard Disk; Attaching The Cover - Fujitsu LIFEBOOK E752 Operating Manual

Installing a hard disk

► Place the hard disk into the hard disk compartment (1).
► Use the pulling aid to pull the hard disk in the direction of the arrow (2) until the contacts engage.

Attaching the cover

► Place the cover in the correct mounting position (1).
If you remove more than one component at the same time, keep the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the screws (2).
► Insert the battery (see Chapter
Fujitsu Technology Solutions
Removing and installing components during servicing
1
2
2 2
1
"Installing a battery", Page 33).
73