Wireless Lan/ Bluetooth (Device-Dependent) / Umts (Device-Dependent); Switching The Wireless Components On And Off - Fujitsu LIFEBOOK E752 Operating Manual

Wireless LAN/ Bluetooth (device-dependent)
/ UMTS (device-dependent)
The installation of a radio components not approved by Fujitsu Technology
Solutions will invalidate the certifications issued for this device.

Switching the wireless components on and off

Before switching on your device for the first time, the on/off switch for
radio components must be in the "ON" position.
If you switch off the radio components, the wireless LAN transmission unit (antenna)
and, if present, the Bluetooth and UMTS module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
You can also deactivate the wireless components individually in the BIOS Setup.
For this to occur, you must either not have assigned a supervisor password or if a
supervisor password has been assigned, you must know this password.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Fujitsu Technology Solutions
Working with the notebook
► Slide the ON/OFF switch into the "ON"
position to activate the radio components.
Bluetooth Bluetooth WirelessLAN WirelessLAN
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.
47