Owner Information (Device-Dependent); Virus Warning (Device-Dependent) - Fujitsu LIFEBOOK E752 Operating Manual

Security functions

Owner Information (device-dependent)

The BIOS feature Owner Information enables you to enter up to 80 characters of text
which is displayed in the bottom left corner of the screen before the operating system
boots up. You could use this feature for example to put your name and telephone
number on the notebook in case it is lost or stolen.
Requirements:
• You have been assigned at least the supervisor password.
• In the BOOT menu, the Boot time diagnostic screen option is set to enabled.
► Call up the BIOS Setup and select the Security menu.
► Highlight the Owner Information field and press the Enter key.
► Add the text you would like to enter under Set Owner Information.
Setup Notice: Changes have been saved is displayed to confirm that the text has been saved.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook will restart and the Owner Information will be adopted.

Virus Warning (device-dependent)

This field checks the boot sectors of the hard disk drive to see if any changes have been
made since the previous system start-up. If the boot sector has been changed since the
previous system start-up (e.g. new operating system or virus attack), a warning is displayed
on the screen. The warning will stay on the screen until you acknowledge the changes by
clicking on Confirm or until you set the Virus Warning function to Disabled.
If the boot sectors have been changed and the reason for this is unknown, a
programme for finding computer viruses should be loaded.
Such a change is not only caused by viruses, but also by the boot manager.
This function does not replace proper anti-virus software.
No supervisor password is required to set it up.
► Call up the BIOS Setup and select the Security menu.
► Highlight the Virus Warning field and press the Enter key.
► Select Enabled to activate the Virus Warning function.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook will restart and the settings will be adopted.
58 Fujitsu Technology Solutions