Chapter 3. Installation And Connection; Before You Begin - D-Link DSL-2740U User Manual

DSL-2740U ADSL/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
CHAPTER 3.

Before You Begin

Please, read this manual prior to installing the device. Make sure that you have all the necessary
information and equipment.
Operating System
Configuration of the wireless router DSL-2740U (hereinafter referred to as "the router") is
performed via the built-in web-based interface. The web-based interface is available from any
operating system that supports a web browser.
Web Browser
The following web browsers are recommended: Windows Internet Explorer, Mozilla Firefox, or
Opera.
For successful operation, JavaScript should be enabled on the web browser. Make sure that
JavaScript has not been disabled by other software (such as virus protection or web user security
packages) running on your computer.
Wired or Wireless NIC (Ethernet or Wi-Fi Adapter)
Any computer that uses the router should be equipped with an Ethernet or Wi-Fi adapter (NIC). If
your computer is not equipped with such a device, install an Ethernet or Wi-Fi adapter prior to
using the router.
Wireless Connection
Wireless workstations from your network should be equipped with a wireless 802.11b, g, or n NIC
(Wi-Fi adapter). In addition, you should specify the values of SSID, channel number and security
settings defined in the web-based interface of the router for all these wireless workstations.
INSTALLATION AND CONNECTION
Page 12 of 94
Installation and Connection