Samsung DM65D User Manual page 17

Reverse Side
― The colour and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
RS232C IN
RS232C OUT
IR /
AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
/ AUDIO IN
AUDIO OUT
SD CARD
USB
(5V, 1.5A)
DVI IN /
MAGICINFO IN
DP IN
HDMI IN
RGB IN DP OUT
Port
RS232C IN
RS232C OUT
IR / AMBIENT SENSOR IN
RGB / DVI / HDMI / AV / COMPONENT /
AUDIO IN
AUDIO OUT
SD CARD
USB
DVI IN / MAGICINFO IN
DP IN
HDMI IN
RGB IN
DP OUT
AV IN / COMPONENT IN
IR OUT
IR
RJ45
COMPONENT IN OUT
RJ45
Description
Connects to MDC using an RS232C adapter.
Supplies power to the External sensor board or receives the light sensor signal.
Receives sound from a PC via an audio cable.
Connects to the audio of a source device.
Connect to an SD memory card.
Connect to a USB memory device.
(5V, 1.5A)
― The USB ports on the product accept a maximum constant current of 1.5 A.
If the maximum value is exceeded, USB ports may not work.
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
Connects to a PC using a DP cable.
Connects to a source device using an HDMI cable.
Connects to a source device using a D-SUB cable.
Connects to another product using a DP cable.
Connects to a source device using the AV/Component adapter.
Receives the remote control signal via the External sensor board and outputs the
signal via LOOP OUT.
Connects to MDC using a LAN cable.