Input Source Selection (Computer 2: Rgb) - Eiki LC-WB42NA Owner's Manual

Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
INPUT button
Top Control
COMPUTER 2 can not be selected when using the COMPUTER IN 2/

MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►
2
Use the Point buttons to select Computer 2 and
▲▼
then press the SELECT button.
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
 Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.48).
Computer 1

Computer 2
HDMI
Video
S-video
Network
buttons to select Input and
▲▼
or the SELECT button.
Remote Control
COMPUTER button
Input Menu
Computer Input
Computer 1

Computer 2
31