Basic Operation - Planar PJL19W User Manual

Basic Operation

Before using the TFT LED Monitor:
Connect external equipments properly.
Press POWER button on the front of TFT LED Monitor. The power LED indicator lights green
when the TFT LED Monitor is on.
Using the OSD Menu
You are able to use OSD menus to adjust various settings by using menu button on the
front of the TFT LED Monitor.
The basic operation is as following:
Enter Auto Adjusting mode , when not in OSD menu
Auto
Exits from OSD menu
Menu Displays main menu and enter items in OSD menu
Select the desired item when in OSD menu
+
Select the desired item when in OSD menu
OSD Lock Out Function
When TFT LED Monitor is in normal display, you can enable the "Locking OSD" function.
Option 1: OSD lock – all 4 buttons are locked except the "POWER" button.
Press and hold the Menu button for 5 seconds to lock the OSD buttons.
The TFT LED Monitor will show an "Locking OSD" message for 2~4 seconds and the
message will disappear automatically.
Repeat this step to unlock.
Locking OSD
8