First Setup - Planar PJL19W User Manual

First Setup

Congratulations on your purchase of this high performance TFT LED monitor.
This TFT LED Monitor comes with the following accessories :
● LED Monitor
● Power Cable
● VGA Cable (15 pin)
Install the stand base
1. Lay the TFT LED Monitor flat on a table with the LED screen face down. To prevent the
monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the
stand.
3. Stand the TFT LED Monitor up.
Uninstall the stand base
1. Lay the TFT LED Monitor flat on a table with the LED screen face down. To prevent the
TFT LED Monitor from being scratched, put a piece of soft cloth on the table on which
the screen will be set.
2. Hold the monitor down with one hand. With the other hand, use two fingers to press
the hooks down as directed below.
3. Remove the base from the stand.
● User's Guide
● Base
4