Operation Instructions - Planar PJL19W User Manual

Operation Instructions

Thank you for purchasing this TFT LED Monitor, a high-resolution multi-scan color TFT LED
Monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This TFT LED Monitor has been tested and found compliant with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
proper protection against harmful interference to a residential installation. This TFT LED
Monitor generates, uses, and can radiate radio frequency energy. Harmful interference to
radio communication may be led as a result if it's not properly installed and used. However,
there is no guarantee that interference will not occur in a particular installation. If this TFT
LED Monitor does cause serious interference to radio or television reception, resetting the
TFT LED Monitor may determine it. Moreover, users are encouraged to correct interference
by doing one or more of the following:
● Reorient or relocate the receiving antenna.
● Move the TFT L ED Monitor and the receiver further away from each other.
●
the receiver is connected.
●
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. Also, any
unauthorized changes or modi ations to this TFT LED Monitor would void the user's
authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
Important Recycle Instruction:
According to WEEE regulation, this TFT LED Monitor can't be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle information
from our website to handle it.
LED
2