Advertisement
5.4
Display function of DVD section
5.4.1 Displaying SYSTEM INFO
SYSTEM INFO contains information on firmware version of the unit and the mechanism drive, and an initialize execution menu.
(1) Set the unit to the Jig RCU mode.
(2) Press DV/HDD/DVD SELECT button on the unit repeatedly so that the HDD lamp lights up on the unit.
(3) Transmit "43-8b" from the Jig RCU.
(4) SYSTEM INFORMATION menu is displayed in the screen.
(5) To move cursor in SYSTEM INFO, use the "
(6) To quit the SYSTEM INFO menu, transmit "43-8b" from the Jig RCU..
(7) Cancel Jig RCU mode.
The example of a display < Version Info 1 >
Sys te m I nf o
Version Info 1
EXIT
The example of a display < Version Info 2 >
Sys te m I nf o
Version Info 1
EXIT
NOTE:
Items other than the ones described above are not used in service work.
", "
Version Info 2
NAVI Info
Application Software Version
Middle Ware Software Version
Syscon Software Version
Boot Loader Software Version
DV Syscon Software Version
OK
SELECT WITH [
PRESS [ "8b" ] TO EXIT
SELECT
Version Info 2
NAVI Info
Silicon Version of E5
DVD Drive Firmware Version
Region
CPRM Key DownLoad
OK
SELECT WITH [
PRESS [ "8b" ] TO EXIT
SELECT
", "
", and "
" buttons of a remote control unit attached to product.
Initialize
Firmware Version of the unit
0.39
When the Firmware of the unit is updated,
0901
this part is changed.
0.88
1.2 / 192
00
] THEN PRESS [ENTER]
Initialize
C0
Firmware Version of the Drive unit
P 012
When the Firmware of the drive unit is updated,
6
this part is changed.
Done
] THEN PRESS [ENTER]
(No.YD049)1-39
Advertisement
