Delete - Inter-m PSI-5120A Operation Manual

- Press the REC button once again to start recording.
- Pressing the REC button while recording enters into Pause status and Time flickers.
- Pressing the REC button once again enables to continuously record. (Save in a file)
- If pressing the STOP/ERASE button, recording stops and the selected mode is changed to the Standby mode.

9) DELETE

This is used to delete unnecessary files saved in inner memory (DRP) or USB memory.
- Partial Delete
• Select Function (DRP or USB) where files to delete is contained.
• Press the STOP/ERASE button to change the mode to the delete mode. "Track?" character flickers in the
display.
• If pressing the ▶▶ (SEARCH UP) button, the starting part of the section to delete flickers.
• Input the starting part by using the I◀◀ / ▶▶I ( SKIP DOWN/UP).
Use the ▶▶ (SEARCH UP) button to move. Input the ending track to delete with the I◀◀ / ▶▶I
(SKIP DOWN/UP) button.
• If pressing the ENTER (Execute) button, the relevant files are deleted.
If deleting is completed, the function is changed to standby mode.
• To exit the delete mode, press the stop STOP/ERASE button.
- Delete All
• Select function to delete (DRP or USB).
• Press the STOP/ERASE button to change the mode to the delete mode.
• Select ALL Delete by using the I◀◀ / ▶▶I ( SKIP DOWN/UP) button.
• If pressing the ENTER (Execute) button, the relevant files are deleted.
If deleting is completed, the function is changed to standby mode.
If the file size to be deleted is large, then it may take several tens of seconds.
DIGITAL PA SYSTEM
17
PSI-5120A/5240A