Repeat; Random; Group Up/Down; Display - Inter-m PSI-5120A Operation Manual

DIGITAL PA SYSTEM

3) REPEAT

Pressing the REPEAT button enables to change the mode to the order of OFF → REPEAT 1 → REPEAT ALL → OFF.
• REPEAT 1 function
- Playback the file selected repeatedly. The display shows 'REPEAT 1'.
• REPEAT ALL function
- Playback the whole disc repeatedly. The display shows 'REPEAT ALL'.
• OFF mode
- Playback the whole disc without repetition and then stops.

4) RANDOM

This function is used to randomly listen to music without any sequence.
- Pressing the Random button during stop enables to display "Random". Press the ▶ (PLAY) button to
play music with random sequence.
- Repeat play is also done according to the Repeat Mode.
- Pressing the Random button once again enables to release this function.

5) GROUP UP/DOWN

When files are saved with folders, you can select a folder with the GROUP UP/DOWN button.
- Press the GROUP △/▽ (UP/DOWN) button to select a folder and then the first track is played.
- The relevant group is displayed with "G#" in front for a track.
※ Play order and indication of Group (folder)
- For CD, music is played to the order of Number/Alphabet/Hangul (Korean character).
- For DRP, files copied in a CD is displayed with "G5", files copied in USB with "G3" and REC files with
"G2" respectively.
- For USB, music is played to the order of Number/Alphabet/Hangul but such order may be changed
depending on status of the inner file system.

6) DISPLAY

- This is function used only in CD Function.
- Pressing the Display Mode button during play enables to display GROUP NAME/TRACK NAME/ALL
TRACK/TIME.
- You can check current status by using DISPLAY MODE button.

7) COPY

- CD COPY
This function is used to copy contents of CD to inner memory (DRP) or USB memory. When you play a
CD, CD copy is done at the same time.
After CD copy, the CD pick up is turn off and the CD is played not from CD disc but from internal
memory (DRP) or USB memory. Using this function, you can greatly save the lifetime of the CD
mechanism.
• Press the CD Function button after inserting a disc to change it to the CD mode.
• Press the COPY button in stop to change it to COPY standby mode.
• Select DRP or USB using I◀◀ / ▶▶I (SKIP DOWN/UP) button to save the contents of the CD to DRP
or USB. If USB memory is not connected, you can select only DRP.
14
PSI-5120A/5240A