LG WD-1022QD Service Manual page 40

GASKET ASSEMBLY
1
Take apart the cabinet gasket clamp.
2
Unscrew 2 screws from the cabinet cover.
3
Open the lower cover cap and unscrew 1
screw inside.
4
Take apart the lower cover.
1
Disassemble the control panel. (page 24)
2
Unscrew all the screws on the upper and lower
sides of the cabinet cover.
1
Take apart the tub gasket clamp.
2
Make sure that the drain hole of the gasket is
put beneath when reassembling the gasket.
efer to the arrow mark on the tub cover.
39