LG WD-1022QD Service Manual page 12

9
Test operation
1
Preparation
for washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
6
Check the water heating.
· Press "Temp." button,
the present temperature will
be displayed.
7
Check drain and spin.
· Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
· Check drain and spin.
2
Press the power button.
· In case of cotton program.
5
Check automatic reverse turn.
· Check if the drum rotates
clockwise and counterclockwise.
8
Power off and open the door.
· Power off and then power on.
· Check if the door can be opened
after Door Lock lamp turns off.
11
3
Press the START/PAUSE
button.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.