Table of Contents
Advertisement
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set
Auto Setup
with following control panel buttons
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found will be added to
●
■
DVB-C
1. Enter the frequency with numeric buttons
Normally set
Symbol Rate
●
2. Select
Start scan
■
DVB-T
1. Select a channel with
Set where the level of
●
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
Set
Sound System
●
Normally set
Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
or
Update Channel List
and
Service ID
with
/
and press
/
and adjust frequency with
Signal Quality
Auto
and
Colour
System, and then perform this function.
to Auto.
- 48 -
to retune DVB channels.
Channel
List.
to Auto.
OK
to search
/
for each channel
becomes the maximum.
Setup.
Advertisement
Table of Contents
