Table of Contents
Advertisement
3) Press
BACK/RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue mode, edit VCR.
●
Auto Setup
Automatically retunes the channels received in the area.
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
●
erased.
If Child Lock PIN number has been set, the PIN number is required.
●
Functions
If tuning has not been done completely, set
●
Watching
■
DVB-C, DVB-T, Analogue channels
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
After settings, select
●
3. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
to store
Child Lock
PIN number
Tuning and editing channels
with
/
and press
with
Symbol Rate
Start scan
with
- 47 -
Manual
Tuning.
Manual Tuning
OK
to access
/
/
/
and press
and
Network ID
to Auto. If
/
and press
OK
OK
to start
Auto Setup
OK
to store
Auto
to search.
Advertisement
Table of Contents
