Table of Contents
Advertisement
GS1 DataBar Composite
Code data read will be transmitted as is.
The conversion to the GTIN format is not supported.
Under the conditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating," a separator (GS: 1Dh)
and 2D code ID mark are inserted between the linear component and 2D Composite component. (For details about the
code ID mark, refer to (5) Code ID mark.)
Under the conditions "Code ID mark: Type 4" and "Linear component length (RSS/EAN-128): Variable," a separator
(GS: 1Dh) is inserted between the linear component and 2D Composite component.
(Note)
GS1 DataBar includes:
GS1 DataBar Omnidirectional (RSS-14),
GS1 DataBar Truncated (RSS-14 Truncated),
GS1 DataBar Limited (RSS Limited),
GS1 DataBar Expanded (RSS Expanded),
GS1 DataBar Stacked (RSS-14 Stacked),
GS1 DataBar Expanded Stacked (RSS Expanded Stacked),
GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked Omnidirectional).
UPC/EAN Composite
Code data read will be transmitted as is.
The specified 2D code format is not applicable to the linear part of UPC-A, UPC-E, EAN-13 and EAN-8 codes.
Under the conditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating", a separator (GS: 1Dh)
and 2D code ID mark are inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 2," a 2D code ID mark is inserted between the linear component and 2D
Composite component. (For details about the code ID mark, refer to (5) Code ID mark.)
UPC/EAN Composite with add-on
Code data read will be transmitted as is.
The specified 2D code format is not applicable to the linear part of UPC-A, UPC-E, EAN-13 and EAN-8 codes.
The conversion to the GTIN format is not supported.
Under the conditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating," Separating", a separator
(GS: 1Dh) and 2D code ID mark are inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 4" and "Code ID mark output mode: Coupling", a 2D code ID mark is
inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 4" and "Code ID mark output mode: Separating", a 2D code ID mark is
inserted before the add-on part and between the add-on code data and 2D Composite component. (For details about
the code ID mark, refer to (5) Code ID mark.)
GS1-128 Composite
Code data read will be transmitted as is.
The specified 2D code format is not applicable to the linear part of UPC-A, UPC-E, EAN-13 and EAN-8 codes.
The conversion to the GTIN format is not supported.
Under the conditions "Code ID mark: Type 1" and "Code ID mark output mode: Separating," a separator (GS: 1Dh)
and 2D code ID mark are inserted between the linear component and 2D Composite component.
Under the conditions "Code ID mark: Type 4" and "Linear component length: Variable," a separator (GS: 1Dh) is
inserted between the linear component and 2D Composite component. (For details about the code ID mark, refer to (5)
Code ID mark.)
47
Advertisement
Table of Contents
