Table of Contents
Advertisement
(6) Number of digits
This optional field specifies whether or not to transmit the number of digits (2 or 4 bytes) of code data to transmit or
disables the transmission (default). Note that UPC and EAN codes (except GS1-128) skip this field.
n1 : thousands (0 to 9)
n2 : hundreds (0 to 9)
n3 : tens (0 to 9)
n4 : units (0 to 9)
Selecting the two-digit length does not transmit n1 or n2.
(7) Code data
The data format for each symbology is described below.
QR Code/MicroQR Code/iQR Code
Code data read will be transmitted as is.
Structured Append QR Code/ Structured Append iQR Code
In batch edit mode(Structured Append QR Code only): The scanner edits code data read and then transmits it. It does
not transmit the code number, number of splits, or parity.
In non-edit mode: The scanner transmits the code number, the number of splits, parity, and code data read. The code
number and the number of splits are 1 byte each and the parity, 2 bytes in hexadecimal format.
SQRC
Code data read will be transmitted as is.
When "Enable transmission of undisclosed data only" is selected in "SQRC Encryption key match", it transmits only
undiscloed data.
X
X
X
X
X
Y
Y
Y
1
2
3
4
5
1
2
X
：Disclosed data
n
Y
：Undisclosed data
m
When transmission of disclosed data + undisclosed data is selected, the following format applies.
X
X
X
X
X
Y
Y
Y
1
2
3
4
5
1
2
When transmission of undisclosed data only is selected, the following format applies.
Y
Y
Y
Y
Y
1
2
3
4
5
PDF417, MicroPDF417, MaxiCode, Data Matrix and Aztec
Code data read will be transmitted as is.
Y
Y
3
4
5
Y
Y
3
4
5
42
Advertisement
Table of Contents
