Table of Contents
Advertisement
Chapter 4 Scanning Codes
Bring the LCD of a mobile phone to the scanning window of the scanner as shown below.
Note: The scanner supports the double-read prevention function that prevents the scanner from reading in the
same code more than once in succession even if you keep applying a code to the scanning window. To read the
same code again after successfully read, therefore, pull the mobile away from the scanning window for at least
half a second to release the double-read prevention function.
Note that if you keep applying a low-quality code that cannot be read within half a second to the scanning
window, the scanner may double-read the code at intervals of half a second or longer.
Note:
The
double-read
prevention
timeout
can
be
specified
with
the configuration software
(ScannerSetting_2D).
Note: The scanner can read codes omnidirectionally. Note that a target code plus its margin should lie within the
scan range.
Note: The scanner may fail to read depending upon the mobile model, the contrast or backlight setting, or the
LCD surface conditions (e.g., sticker pasted, scratches).
9
Advertisement
Table of Contents
