Table of Contents
Advertisement
3.11 Password Setting
Follow these steps to change the password.
1.
Choose the "Set Password" option from the "Initial Setup Screen"
menu and press <Enter>. The screen displays the following mes-
sage:
2.
Press <Enter>.
3.
If the CMOS is good and this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen displays the following message:
4.
Type the current password and press <Enter>.
5.
After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select
either "Setup" or "System" from the "Advanced BIOS Features" menu.
3.12 Save & Exit Setup
If you select this and press <Enter>, the values entered in the setup utili-
ties will be recorded in the CMOS memory of the chipset. The processor
will check this every time you turn your system on and compare this to
what it finds as it checks the system. This record is required for the sys-
tem to operate.
3.13 Exit Without Saving
Selecting this option and pressing <Enter> lets you exit the setup program
without recording any new values or changing old ones.
AIMB-760 User Manual
Please Enter Your Password
Please Confirm Your Password
56
Advertisement
Table of Contents
