CAME MRT001 Quick Manual page 3

AUTOMATIC DOORS
REMOTE CONTROL FOR
1. INSERTION OF BATTERIES
FUNCTIONS
CONFIGURATION
BY REMOTE
CONTROL
• Open the battery compartment
• Insert two AAA batteries as shown
above
• Close the battery compartment
2. REMOTE CONTROL OPERATION
For optimum results, point the remote control directly at the sensor before you press the buttons.
It has a range of about 5 metres. The sensor can be adjusted with or without its cover.
0-9
Number buttons (1)
Not used
Plus button (2)
Unlock (3)
Minus button (4)
Hold time (5)
Sensitivity (6)
Detection mode (7)
Immunity (8)
3. CONFIGURING YOUR SENSOR
Every adjustment session using the infrared remote control must start with unlocking and end in locking. (The table
below lists the parameters able to be adjusted by remote control and the operations required in order to adjust these
parameters).
MR8104/5/6
MRT001
Documentazione
Tecnica
M89
1.0
rev.
11/2009
119PM89
Not used
Not used
Check values (9)
Lock (10)
Relay configuration (11)
Not used
Default value (12)
Not used