Sequence Setting - Samsung SCP-3371/SCP-3371H User Manual

Sequence Setting

Preset
This function enables the memorization of a selected location and
activates the Pan, Tilt, and Zoom functions at that location. Saved
locations can be recalled using the Preset Execute command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a screen as shown
below. Move the joystick in all four directions to select the desired
number.
Preset Setting
Preset = 001 (1~255)
001 :
021 :
041 :
061 :
081 :
101 :
121 :
Saving Preset Locations :
Selecting a preset number and pressing the Enter key redirects
the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset mode, the zooming focus can be controlled only by the
zoom command.
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume
Preset
Setting
Edit
Home Position
Execute
Clear
Status
English - 55
ON
OFF