Example Of Installing An Environmental Model - Samsung SCP-3371/SCP-3371H User Manual

connection & installation

EXAMPLE OF INSTALLING AN ENVIRONMENTAL MODEL

❖
Fix the installation base with the bracket
1.
Fix the base with the bracket by turning it clockwise.
2.
As shown in the figure, lightly pull the hinge door handle in the
side end of the install base and lay it down. Please refer to the
"Camera Wiring Interface Board" on page 14, connect the wires.
J

Do not connect the camera to a power outlet until the installation is complete.
Supplying power while the installation is in progress may cause fi re or damage
the product.
3.
Connect the camera safety wire to the installation base.
38_ connection & installation
Safety Cable