On-Ceiling Mount Type Installation Example - Samsung SCP-3371/SCP-3371H User Manual

ON-CEILING MOUNT TYPE INSTALLATION EXAMPLE

Attaching the template and installing the install base
Attach the provided template on the ceiling. Based on the template, drill a 86mm hole in the ceiling and
arrange the wires through the hole. Then, install the install base as shown.
Before installing the exposed bracket, open the hinged door at the bottom of the bracket as shown in the
picture. Hold the Lever on the hinged door to open.
I

In the case of installing the camera at highly humid place, install it on the ceiling after attaching the enclosed insulation sheet on
the back of install base.
Wiring Terminal Cables
Connect the cables to the terminal block on the hinged door. For the
location of the wiring pins, please refer to the "Camera Wiring Diagram"
on Page 14. Once the wiring is successful, close the hinged door.
M

Do not connect the camera to a power outlet until the installation is complete.
Supplying power in the middle of the installation may cause fi re or damage the
product.
Template
Insulation Sheet
English - 35