Lenovo IdeaPad Z710 Hardware Maintenance Manual page 65

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
Rating label
On line print rating label
3G Label
KCC Label
GML Label
WLAN Label for Malaysia
WLAN Label for CA\US\TW\Indonesia\Israel
WLAN Label for BRAZIL
WLAN Label for ISRAEL
Indonesia D side label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
e
g
f
h
i
b
j
Lenovo Z710
c
d
61